The Puffco Peak Pro Link lets you connect your Peak Pro smart e-rig directly to your favourite glass rig, transforming traditional pieces into precision-controlled vapor systems without torches, timers, or temp guns.

Less setup, more sessions

Setting up a traditional glass rig is a labor of love. Peak Pro Link streamlines the process so you can immediately engage with your favorite glass, faster than ever.

Uncompromising consistency

A traditional rig starts to lose temperature after the first hit, requiring constant reheating for the ideal dab. The Puffco Peak Pro Link maintains the perfect temp throughout your sesh, so your first hit’s just as good as your last. Built with Puffco’s patented 3D heating technology and real-time temperature control, the Puffco Peak Pro Link delivers consistent heat, bigger vapor clouds, and bold terpene-rich flavour with a single button.

Fully customizable control

The Puffco Connect app lets you dial in the exact experience you’re looking for, save it, and return to it again and again. Even more precision, now at the click of a button.

Compatible with Peak Pro 3D and 3DXL Chambers, it’s the simplest way to breathe new life into the glass you already love.

Only compatible with rig's with a 90 degree joint

FEATURES

• Turns the Puffco Peak Pro into a glass rig-ready e-rig adapter
• Real-time temp control and app-driven customization
• No torch, timers, or guesswork
• Maintains consistent heat through sessions
• Easy setup and versatile compatibility

WHAT'S INCLUDED

1x Peak Pro Link
1x Base Stand
2x O-Rings
1x 10mm Joint Adapter
1x 14mm Joint Adapter
1x Cable Clip

Note:

*Peak Pro and 3DXL Chamber not included.
*Compatible with Peak Pro 3D + 3DXL Chambers.

How to connect Link to my Peak Pro

1. First, pair your Peak Pro to the app and update the firmware. Link requires firmware version ‘AW’ or newer to operate.
2. Remove the glass from your Peak Pro and gently press the Peak Pro Link stand into the base.
3. Remove the chamber from your Peak Pro and attach it to the banger.  
4. Insert connector end of Link into Peak Pro base where 3D Chamber attaches. Turn clockwise until seated securely.
5. Select the silicone joint adapter that fits your glass rig (10mm or 14mm) and place it onto the elbow joint of the banger. You can insert the banger onto the Link stand to keep it upright while the Peak Pro Link is not in use.
6. When your glass rig is ready, place the silicone joint adapter into your glass joint opening. The banger should sit upright. The Peak Pro Link cable should sit or hang loosely. Note: Be careful that your cable doesn’t twist or get caught on anything as you get ready to use. You can also gently wrap the cable around your Peak Pro with enough slack to connect to your rig.
7. Select your desired heat setting on your Peak Pro.
8. Start your heat cycle and use your glass rig to take your hit, using the 3D Chamber + Peak Pro as you would normally to control your sesh.

How to clean the Puffco Peak Pro Link

1. Before disassembling or cleaning, be sure the device has completely cooled down.
2. Remove and disassemble the banger elbow and silicone joint.
3. The metal elbow and silicone joints can be cleaned with 90%+ iso, as well as the stand.  
4. For a deeper clean, soak the elbow and silicone joints in 90%+ iso for 20-30 min.
5. You can also clean the contact points inside the banger and connector with a cotton swab dipped in iso.
6. Let air-dry completely before heating.

Warning: Do NOT soak entire Link in ISO